PSM 300 SE112 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.
Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode technology or stereo mode to create a personal mix from two channels of audio.
Specifications :RF Carrier Range : 488- 937.5 MHz varies by regionCompatible Frequencies : Per band up to 15Tuning Bandwidth : 24 MHz MaximumOperating Range : environment dependent 90 m ( 300 ft)Audio Frequency Response : 38 Hz–15 kHzSignal-To-Noise Ratio : A-Weighted 90 dB (typical)Total Harmonic Distortion : ref. ±34 kHz deviation @1 kHz <0.5% (typical)Companding : Patented Shure Audio Reference Companding Spurious Rejection : ref. 12dB SINAD >80 dB (typical)Latency : <0.7 msFrequency Stability : ±2.5 ppmMPX Pilot Tone : 19 kHz (±1 Hz)Modulation : FM*, MPX Stereo *ref. ±34 kHz deviation @1 kHzOperating Temperature : -18°C to +63°CP3T : RF Output Power 10, 20, 30 mW Note: varies by regionRF Output Impedance : 50 Ω (typical)Net Weight : 783 g(27.6 oz.)Dimensions : 43 x 198 x 172 mm (1.7 x 7.8 x 6.8 in.), H x W x DPower Requirement : 12-15V DC, 260 mA MaximumAudio Input : Connector Type 6.35 mm (1/4") TRSPolarity : Tip positive with respect to ringConfiguration : Electronically balancedImpedance : 40 kΩ (actual)Nominal Input Level switchable : +4 dBu, –10 dBVMaximum Input Level : +4 dBu+22 dBu-10 dBV+12.2 dBuPin Assignments : Tip=hot, Ring=cold, Sleeve=groundPhantom Power Protection : Up to 60 V DCAudio Output : Connector Type 6.35 mm (1/4") TRSConfiguration : Electronically balancedImpedance : Connected directly to inputsP3R : Active RF Sensitivity at 20 dB SINAD 2.2 µVImage Rejection : >90 dB Adjacent Channel Rejection >60 dBIntermodulation Attenuation : >50 dBBlocking : >60 dBAudio Output Power : 1kHz @ <1% distortion, peak power, @32Ω 40 mW + 40 mWMinimum Load Impedance : 4 ΩHeadphone Output : 3.5 mm (1/8") stereoOutput Impedance : <2.5 ΩNet Weight : 98 g(3.5 oz.) (without batteries)Dimensions : 110 x 64 x 21 mm H x W x DBattery Life : 5–7 hours (continuous use) AA batteries
PSM 300 SE112 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.
Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode technology or stereo mode to create a personal mix from two channels of audio.
Specifications :RF Carrier Range : 488- 937.5 MHz varies by regionCompatible Frequencies : Per band up to 15Tuning Bandwidth : 24 MHz MaximumOperating Range : environment dependent 90 m ( 300 ft)Audio Frequency Response : 38 Hz–15 kHzSignal-To-Noise Ratio : A-Weighted 90 dB (typical)Total Harmonic Distortion : ref. ±34 kHz deviation @1 kHz <0.5% (typical)Companding : Patented Shure Audio Reference Companding Spurious Rejection : ref. 12dB SINAD >80 dB (typical)Latency : <0.7 msFrequency Stability : ±2.5 ppmMPX Pilot Tone : 19 kHz (±1 Hz)Modulation : FM*, MPX Stereo *ref. ±34 kHz deviation @1 kHzOperating Temperature : -18°C to +63°CP3T : RF Output Power 10, 20, 30 mW Note: varies by regionRF Output Impedance : 50 Ω (typical)Net Weight : 783 g(27.6 oz.)Dimensions : 43 x 198 x 172 mm (1.7 x 7.8 x 6.8 in.), H x W x DPower Requirement : 12-15V DC, 260 mA MaximumAudio Input : Connector Type 6.35 mm (1/4") TRSPolarity : Tip positive with respect to ringConfiguration : Electronically balancedImpedance : 40 kΩ (actual)Nominal Input Level switchable : +4 dBu, –10 dBVMaximum Input Level : +4 dBu+22 dBu-10 dBV+12.2 dBuPin Assignments : Tip=hot, Ring=cold, Sleeve=groundPhantom Power Protection : Up to 60 V DCAudio Output : Connector Type 6.35 mm (1/4") TRSConfiguration : Electronically balancedImpedance : Connected directly to inputsP3R : Active RF Sensitivity at 20 dB SINAD 2.2 µVImage Rejection : >90 dB Adjacent Channel Rejection >60 dBIntermodulation Attenuation : >50 dBBlocking : >60 dBAudio Output Power : 1kHz @ <1% distortion, peak power, @32Ω 40 mW + 40 mWMinimum Load Impedance : 4 ΩHeadphone Output : 3.5 mm (1/8") stereoOutput Impedance : <2.5 ΩNet Weight : 98 g(3.5 oz.) (without batteries)Dimensions : 110 x 64 x 21 mm H x W x DBattery Life : 5–7 hours (continuous use) AA batteries
Sign In
Create New Account